EOT Crane

We offer efficient EOT Cranes with a drive system comprising crane duty electric motors, gearboxes and brakes. Sheet metal fabricated dust proof control panel houses contactors for all motions, transformer, MCB and other electrical components arranged logically. For control and safety purpose, Limit Switches are provided. These help in preventing problems like over hoisting and over travelling. Rubber buffers are provided at the four ends of end carriages and crab for shock absorption.

Range

Single Girder EOT Crane
Double Girder EOT Crane
Underslung Crane

Our range of weighbridges includes:

Single Girder EOT Crane
Double Girder Crane
Underslung Crane

ADORN manufactures E.O.T. and H.O.T Single Girder Overhead Travelling Crane in accordance with IS: 3177 & IS: 807 and as per international standards.

Characteristics

Reduced wheel loads
Low head room standard hoists
Easy to operate & maintain
Competitive price

Optional Features

Operated through wireless remote control
Flameproof construction
Variable Frequency Drive (VFD) are available
With soft starter

ADORN manufactures E.O.T. and H.O.T Double Girder Overhead Travelling Crane in accordance with IS: 3177 & IS: 807 and as per international standards.

Features

High efficiency
Trouble free performance
Full length platform on one side
Low maintenance cost

Optional Features

Cabin operated
Dual Speed / Micro speed
Crabs with auxiliary hoist
Hazardous application
Remote control operation
With VFD drives

ADORN manufactures Single Girder as well as Double Girder Underslung cranes that find its application where the headroom in a factory is limited or the structure does not allow any other means of supporting the crane other from the roof. Typically, Underslung cranes ranges from 1MT to 10MT, however higher capacity Underslung Cranes can also be manufactured as per clients requirement. Precise control of the up/down motion and/or travel motion can be achieved by fitting Variable Frequency Drives in the panels (optional). Control can be either through a Pendant Push Button station or a Radio Remote Control (optional).

Electric Wire Rope Hoist

ADORN Electric Wire Rope Hoists are designed & manufactured as per IS: 3938. They are compact and modular with easy in operation & maintenance. All the hoist components viz. motor, gearbox, brake, rope drum, control panel, trolley etc. are easily accessible.

Standard Features

FAIL to SAFE type brake
Limit switches for preventing over hoisting & over lowering
Tested Wire Rope confirming to IS 2266
Forged Hooks conforming to IS 3815
Spur / Helical gears running on antifriction ball bearings with oil bath lubrication
Push Button Stations operating at step down voltage of 110 V: 42 V or 24 V
Rope Drum made from M.S. Seamless pipe with machined cut spiral grooves for rope
Rope Guide provided for perfect sitting of rope in drum grooves

Optional Features

Hoist with flexible trolley for curved path
Flame proof hoists
Hoist with micro speed arrangements
Hoist with high speeds & high lifts

Gantry Crane (Goliath Crane)

ADORN design and manufactures Goliath/Gantry Cranes in accordance with IS: 3177 & IS: 807 and as per international standards. Goliath Cranes or Semi- Goliath Cranes are manufactured in both single and double girder version.

They are essentially the same as the regular overhead cranes except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs running on fixed rails or other runway. These “legs” eliminate the supporting runway and column system and connect to end trucks which run on a rail either embedded in or laid on top of the floor.

They are ideal for outdoor applications where lifting facilities are provided without the cost of a building or any supporting steelwork. They are also suited to indoor applications where existing building structures are not suitable to take overhead cranes, and where additional supporting steelwork would result in a loss of floor area.

Application Area

Construction sites
Ports and harbors
Workshops where existing columns cannot bear the wheel loads of a bridge crane
Workshops with low roof tie height that might restrict the height of lift of a regular bridge crane
Locations where bay lengths are excessive
Locations where bay lengths do not remain constant
Sites / projects where the crane itself needs to be relocated from one place to another
Locations where loads are to be shifted from points outside the crane span as in the case of an overhang on either side of the rails

Jib Crane

ADORN Jib Cranes are designed & manufactured in accordance to IS: 807 & IS: 3177. They are Wall mounted or Pillar type fully floating on bearings with swivel facility up to 360°. Self aligned type double roller thrust bearings take care of horizontal, vertical and radial thrust loads.

Jib cranes are available in lifting capacities ranging from 250 Kgs to 7500 Kgs and arm radius upto 5 mtrs. for the required application.

Jib arm is fabricated from heavy section I-Beam or of triangular truss construction to keep the deflection in acceptable limits. Jib arm is suitable to accommodate trolley with chain pulley block for manual travel and lifting operations or electric wire rope hoist for electric operations.

Goods Lift

ADORN manufactures Goods Lift / Cage Hoist as per client’s specific requirement using superior quality raw material and bought out items.

Constructional Features

Cage fabricated from steel sections and sheets
Chequered plate cage flooring for antiskid property
Collapsible floor / cage doors with locking arrangement
Cage guided with rollers on “T” guide rail
Hoisting and lowering operations performed by our electric wire rope hoist
Operation through interlocked push button station fixed on floors
Limit switches are provided for safety

Material Handling Equipmen

EOT Crane

Electric Wire Rope Hoist

Gantry Crane (Goliath Crane)

Jib Crane

Goods Lift

Other Adorn Products